MOT failure rates

Hyundai Ioniq MOT failure rates: what to expect

What fails on a Hyundai Ioniq at MOT, how often, and what each fix typically costs.

Updated 8th November 2026

Hybrid-specific checks also matter. Below I list the common failure points, what the tester inspects for each, how to spot trouble before the test and what the repair work typically involves so you can prepare the car properly.

Most common MOT failure areas and what the tester looks for

The tester records defects that affect safety, roadworthiness and emissions where applicable. Check these areas yourself before the test to avoid failures.

During the MOT the tester will inspect visible condition and operation, measure tread depth and check for leaks or excessive play, confirm lamps and indicators work and are correctly fitted, and look for obvious corrosion or structural problems. They will also operate interior checks such as seat belt latches and handbrake operation.

If the tester finds anything worn, loose, incorrectly adjusted or intermittently working they will issue a failure or advisory. Many failures are simple items an owner can spot and remedy; others need workshop diagnosis and parts replacement, which I describe in the sections below.

Tyres, wheels and tracking. What the tester checks and how to spot faults

Tyres are a frequent cause of MOT failure. The tester checks legal tread depth, condition for cuts, bulges or exposed cords, correct fitment of the tyre to the rim and the security of road wheels. They also note imbalance and misalignment where it is causing tyre damage.

You can spot many tyre faults by doing a visual and hands-on inspection. Use a tread depth gauge or the tread-wear indicators on the tyre, look for lumps or sidewall damage, and check for uneven wear across the tyre shoulder. Make sure valve caps are present and wheels are not visibly damaged.

Repairs and work involved: replacing one or more tyres, fitting and balancing wheels, and camber/caster or toe correction at a wheel alignment bay if uneven wear is present. If a wheel or rim is bent or cracked it will be replaced or professionally repaired and rebalanced. The workshop will also check wheel security and re-torque wheel fasteners to the manufacturer’s procedure.

Brakes and handbrake. What the tester is checking and how to pre-check

Brake faults are another common failure item. The MOT examiner checks brake efficiency, condition of visible brake components such as pads and discs where accessible, and the operation of the parking brake. They will also look for fluid leaks and corrosion affecting brake pipes and hoses.

Before the MOT, listen and feel for any juddering or grabbing under braking and look through the wheel at the disc surface and pad thickness. Check that the parking brake holds the car on a slope and that operation feels consistent. Any abnormal noise or fluid on the inside of wheels warrants a garage visit.

Work involved in repairs: replacing brake pads and discs where worn, servicing calipers and sliders to restore even operation, replacing brake hoses or pipes if cracked or corroded, and bleeding the brake system to remove air. Parking-brake adjustments or replacing the mechanical or cable components of the handbrake are common workshop jobs if the brake does not hold or adjust correctly.

Lights, wiring and infotainment checks. Bulbs, connectors and the GPS issue

Lighting and electrical faults fail MOTs when lamps do not illuminate, are incorrectly aimed, or when wiring and connector corrosion causes intermittent operation. The tester checks every externally visible bulb and its operation, including brake lights, indicators and number plate illumination. Interior electrical faults can also be noted.

Visually inspect all lamps, ask someone to operate the brake pedal while you watch the rear lights, and cycle the indicators and hazards. Look for water ingress, cracked lenses or loose fittings. Dashboard warning lights that relate to lighting or charging should be resolved before the test where possible.

The GPS can stop working after a navigation system update. The fix needed the control unit reset with the battery disconnected. This was documented on cars with the factory navigation. General repair work for lighting and wiring faults includes replacing bulbs and lenses, repairing or replacing wiring looms and corroded connectors, and replacing control modules where diagnostics show failure. Headlamp aim is checked and adjusted using manufacturer procedures where required.

Suspension and steering. What causes MOT refusals and how to detect them

Suspension and steering components are inspected for excessive wear, broken bushes, damaged shock absorbers, loose joints and corrosion to structural mountings. The tester will look for play, broken mounts, and components that allow excessive movement which affects wheel control.

Before the test, drive the car slowly over varied surfaces and listen for knocks or clunks from the suspension and steering, and note any pull to one side or uneven tyre wear. Visually inspect lower suspension arms for corrosion and check for any leaking dampers or oil on component faces.

Repair work typically involves replacing worn shock absorbers or struts, swapping out degraded suspension bushings, renewing drop links or anti-roll bar links, and addressing corroded mounting points. Where steering joints or rack components show play they are either tightened or replaced, and an alignment is usually performed after suspension repairs to correct tracking and restore even tyre wear.

Hybrid powertrain checks and what to expect at the MOT

When preparing a hybrid for an MOT you should include checks specific to hybrid and fuel systems alongside the usual items.

On any hybrid of this type, check the service history for fuel system maintenance and any recorded battery or pump work, and have the car driven so you can confirm it behaves normally in town and on an incline. Ask to see diagnostic checks if the dealer or garage ran them; for high-voltage systems, a qualified technician should inspect and test components.

All hybrid electrical work should be carried out by technicians trained for high-voltage systems.

Additional practical checks and the paperwork to bring Bring the service history, any recent repair invoices and the owner’s manual to the MOT. The tester may compare the car’s condition to what is recorded in the handbook and service record. If any manufacturer technical bulletins or recalls apply, the free registration check can show them; check gov.uk for current vehicle tax rules and to confirm whether the car’s tax is valid.

A walk-round before the test will catch many failures: test lights, glance at tyre tread and sidewalls, listen for unusual noises from brakes or suspension and check that doors, mirrors and seat belts are secure. For hybrid cars, ask the seller or workshop whether any hybrid-specific warning lights have been present and whether diagnostic reports are available. If a defect is found during an MOT the test station will advise whether the car fails and what repairs are needed to re-present it for a pass.

Frequently asked questions

Which Hyundai Ioniq versions were sold new in the UK?

By year of first UK registration: 2016: Original Ioniq, hybrid and electric only; 2017 to 2018: Original Ioniq: hybrid, plug‑in hybrid and electric; 2019: Either the original or the lightly facelifted Ioniq; 2020 to 2022: Facelifted Ioniq: hybrid, plug‑in hybrid and electric; production ended. Sold new in the UK as full (self‑charging) hybrid, plug‑in hybrid and battery electric only.

What gearbox types does the Ioniq use?

The Ioniq uses either a dual‑clutch automatic gearbox or a single‑speed gearbox on electric cars. On any test drive check for smooth shifts from a dual‑clutch and listen for unusual noise from the single‑speed motor and gearbox housing.

What should I check on the navigation or infotainment before buying?

The GPS can stop working after a navigation system update. The fix needed the control unit reset with the battery disconnected. This was documented on cars with the factory navigation.

How does vehicle tax apply to this car?

The rules and rates change, usually each April, gov.uk publishes the current rate, and a registration check shows whether a car is taxed.